SUPER MICRO Computer AOC-USAS-L4i - Manual (Page 51)

6-3
Safety Information and Technical Specifications
The following subsections explain how to use the Configuration Wizard to create
storage configurations:
• “Understanding Virtual Disk Parameters”
• “Using Auto Configuration”
• “Using Guided Configuration”
• “Using Manual Configuration: RAID 0”
• “Using Manual Configuration: RAID 1”
• “Using Manual Configuration: RAID 5”
• “Using Manual Configuration: RAID 10”
Understanding Virtual Disk Parameters
This section describes the Virtual Disk Parameters that you can set when you
use the Guided Configuration or Manual Configuration modes of the Configuration
Wizard. You should change these parameters only if you have a specific reason for
doing so. It is usually best to leave them at their default settings.
• Stripe Size: A stripe size of 64 Kbytes is supported.
• Disk Cache Policy: Select a cache setting for this disk: Unchanged, Enabled, or
Disabled.
• Init State:
– No Initialization: The new configuration is not initialized and the existing data on
the disks is not overwritten.
– Fast Initialization: MegaRAID Storage Manager software quickly writes zeroes to
the first and last 8 Mbyte regions of the new virtual disk.
– Full Initialization: A complete initialization is done on the new configuration. This
may take a long time if the disks are large.