SUPER MICRO Computer AOC-USAS-L4i - Manual (Page 56)

6-8
Add-on Card User's Guide
Using Manual Configuration: RAID 0
Follow these steps to create a RAID 0 storage configuration using the Manual
Configuration mode of the Configuration Wizard.
Figure 6-5 shows the first screen that appears when you select Manual Configura-
tion.
1. In the first Manual Configuration window, select two or more available drives
in the left panel. Click the Right Arrow button to move the selected drives to the
right panel.
Note: MegaRAID Storage Manager software will not allow you to select the disk
drive on which the operating system is installed or any other drives that are already
part of a configuration.
2. Click Accept to accept these drives for the new RAID 0 array.
Note: To remove a single drive from a proposed new array, select the drive icon
in the right panel and click the Left Arrow button.
3. Click Next.
The next Configuration Wizard window appears, as shown in Figure 6-6.
Figure 6-5: Manual Configuration - First Manual Configuration Screen