Sunbeam GL8200 - Manual (Page 7)

5
Heading Before using your Gelateria
Important: Place the Gelateria upright on
a flat surface for at least 12 hours before
using it for the first time, to allow the oil
contained in the compressor to settle. The
same procedure should be followed in the
event that the ice-cream maker has been
accidentally placed in a non-upright position.
1. Before use, thoroughly wash all parts
that will come into contact with the ice-
cream. The fixed stainless steel cylinder
should be cleaned using a damp cloth and
dried thoroughly. The removable cylinder,
transparent lid with pouring hole and
paddle should be washed in warm soapy
water, rinsed and dried thoroughly.
2. When your Ice-Cream Maker is first used,
you may experience an odour and possibly
a slight wisp of smoke from the appliance.
This is released by the insulation material
of the motor when the appliance is heated,
which protects the motor and is a normal
occurrence. After the first few uses, this
will no longer occur.