Symbol Technologies MC9000-K - Manual (Page 313)

Accessories 7-57
S5 Backspace Character 0-255 8 ASCII
S6 Wait Time before Blind Dialing or Dial Tone 2-255 2 * S
S7 Wait Time for Carrier, Silence or Dial Tone 1-255 50 * S
S8 Pause Time for Dial Delay Modifier 0-255 2 * S
S9 Carrier Detect Response Time 1-255 6 * 0.1 S
S10 Lost Carrier to Hangup Delay 1-255 14 * 0.1 S
S11 DTMF Tone Duration 50-255 95 * mS
S12 Escape Prompt Delay (EPD) 0-255 50 * .02 S
S14 General Bit Mapped Options Status - 138 (8Ah)
S16 Test Mode Bit Mapped Options Status - 0
S19 Reserved - 0
S20 Reserved - 0
S21 V.24 Bit Mapped Options Status - 52 (34h)
S22 Speaker/Results Bit Mapped Options - 117 (75h)
S23 General Bit Mapped Options Status - 62 (3Dh)
S24 Sleep Inactivity Timer 0-255 0 S
S25 Delay to DTR off 0-255 5 S
S26 RTS-to-CTS Delay 0-255 1 .01 S
S27 General Bit Mapped Options Status - 73 (49h)
S28 General Bit Mapped Options Status - 0
S29 Flash Dial Modifier Time 0-255 70 10 mS
S30 Disconnect Inactivity Timer 0-255 0 10 S
S31 General Bit Mapped Options Status - 195 (C0h)
S36 LAPM Failure Control - 7 *
Table 7-7. S-Register Settings (Continued)
Reg Function Range
Default
Units De-fault Saved
* Register value may be stored in on of two user
** Country-dependent