Symbol Technologies MC9000-K - Manual (Page 178)

MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide 4-20
Mobile Computer Configuration
Inserting the mobile computer into the cradle provides direct-connect RAS service. Configure each
mobile computer for use with the cradle, just as any remote client would be configured to connect to
an Internet Service Provider (ISP). See
Persist on page 3-45 to save the settings to the registry.
The computer comm port to setting was set to USB during the eConnect installation procedure. To
confirm the setting:
1. On the mobile computer double-tap the Ctl Panel icon and double-tap Comm Settings to
enter the Comm Settings, window.
Figure 4-19. Comm Settings Window
2. Confirm that the Port Value is set to USB. To change the setting tap Port to highlight and use
the left
and right arrow buttons to select the USB value.
3. Tap OK to exit the Comm Settings window and tap Exit to exit the Control Panel window.