Sanyo VCC-WB2000 - Manual (Page 14)

Network Camera Settings
1 Installation of Plug-in Software
Install the plug-in software (on the setup CD-ROM) onto the computer that is to be used. Installing the
plug-in software makes it possible to view live images from network cameras using the computer’s web
browser.
1
Turn on the power for the computer.
After Windows has loaded, continue to the
next step.
2
Insert the setup CD-ROM into the
CD-ROM drive of the computer.
3
Click Start and then click Run.
4
Type D:\Setup.exe.
Type the drive letter for the CD-ROM drive of
the computer in place of “D”.
5
Click the [OK] button.
After a short wait, the installation window will
appear.
Note: Simply answer the prompts that
appear on the screen in order to
continue installing the software. The
installation program has been set up
beforehand to install the software
correctly.
6
Click the [Next] button.
7
Read the license agreement, and select
Agree if you agree to the terms of the
license. Then click the [Next] button.
L5AB2/US (VCC-WB2000) GB 2002, 7, 4
English – 13 –