Savin 2045e - Manual (Page 20)

Preparing to Print
14
2
Setting custom size paper
Note
ˆ Custom sizes can also be set using
the printer driver. The following
procedures are not necessary
when setting custom sizes using
the printer driver.
ˆ Custom size settings set using the
printer driver have priority over
those set using the machine's dis-
play panel.
ˆ When the printer driver is not used,
make settings using the display panel.
Reference
For printer driver settings, see the
printer driver Help.
A
Press the {User Tools/Counter} key
on the control panel.
B
Press [ Printer Features ] .
C
Press the [ Paper Input ] tab.
D
Press [ Bypass Paper Size ] .
E
Press [ Custom Size ] .
F
Enter the vertical size of the paper
using the number keys, and then
press
[ # ] .
G
Enter the horizontal size of the
paper using the number keys, and
then press
[ # ] .
H
Press [ OK ] .
The paper sizes entered are dis-
played.
I
Press the {User Tools/Counter} key.
Setting thick paper or OHP
transparencies
Note
ˆ Paper settings can also be set using
the printer driver. The following
procedures are not necessary
when setting paper sizes using the
printer driver.
ˆ Paper size settings set using the print-
er driver have priority over those set
using the machine's display panel.
ˆ When the printer driver is not used,
make settings using the display panel.
Reference
For printer driver settings, see the
printer driver Help.
A
Press the {User Tools/Counter} key
on the control panel.
B
Press [ System Settings ] .
C
Press the [ Tray Paper Settings ] tab.
D
Press [ TNext. ] to scroll through the
list.
E
Press [ Paper Type: Bypass tray ] .
F
Select [ OHP ] or [ Thick Paper ]
G
Press [ OK ] .
The paper type selected is displayed.
H
Press the {User Tools/Counter} key.
Note
ˆ The settings made will remain
valid until they are reset again.
After printing on OHP transpar-
encies or thick paper, make sure
to clear settings for the next user.