Savin 2045e - Manual (Page 41)

Installing the Software
35
2
ˆ If you send data from your compu-
ter when data is being received
from another client computer,
your data will be printed after
completing the print job for the
other client computer.
ˆ When the machine is connected to
the computer properly via the 1394
interface, the appearance of the
icon in the printer window chang-
es.
Windows 2000
Important
ˆ In Windows 2000, the optional
IEEE 1394 interface board can only
be used with Service Pack 1 or lat-
er. If the Service Pack is not in-
stalled, the connectable number of
devices in an IEEE 1394 bus is only
one, and the client cannot access
the IEEE 1394 interface board with-
out using an account that has Ad-
ministrator permission.
A
Connect the machine and compu-
ter using the IEEE 1394 interface
cable.
The
[ Found New Hardware Wizard ] di-
alog box appears.
B
Click [ Next ] .
“This wizard will complete the in-
stallation for this Device: Un-
known” appears.
C
Select [ Optional search locations: ] ,
and then click [ Next ] .
D
When “Locate Driver Files” ap-
pears, select the
[ Optional search lo-
cations. ] check box and the [ Specify
a location ] check box, and then
click [ Next ] .
E
Hold down the left {SHIFT} key
and insert the CD-ROM into the
CD-ROM drive.
Keep the left {SHIFT} key held
down until the computer has fin-
ished accessing the CD-ROM.
If the Auto Run program starts,
click
[ Cancel ] , and then click [ Exit ] .
F
Click [ Browse ] .
G
Select the printer driver you want
to install. Each printer driver is
stored in the following folders:
• PCL 6: \DRIVERS\PCL6\
WIN2K_XP\(Language)\DISK1
• PCL 5e: \DRIVERS\PCL5E\
WIN2K_XP\(Language)\DISK1
• RPCS™: \DRIVERS\RPCS\
WIN2K_XP\(Language)\DISK1
• PostScript 3: \DRIVERS\PS\
WIN2K_XP\(Language)\DISK1
H
Click [ Open ] .
I
Click [ OK ] .
A printer model selection dialog
box appears.
J
Follow the instructions on the
screen.
Note
ˆ When installation is complete,
the printer with its port directed
to “1394_00n” appears in the
[ Printers ] folder. (“n” is the
number of printers connected.)
Windows XP
A
Connect the machine and the
computer using the IEEE 1394 in-
terface cable.
The
[ Found New Hardware Wizard ] di-
alog box appears.