Savin 2045e - Manual (Page 42)

Preparing to Print
36
2
B
Confirm that “This wizard helps
you install software for: (printer
name)” is displayed, and click
[ In-
stall from a list or specific location (Ad-
vanced)
] , and then click [ Next ] .
“Please choose your search and in-
stallation option.” appears.
C
Select the [ Search for the best driver
in these locations. ] check box, and
[ Include this location in the search: ]
check box.
D
Install the printer driver follow-
ing the same procedure as in steps
E to J for Windows 2000.
Note
ˆ When installation is complete, a
printer with its port directed to
“1394_00n” appears in the
[ Print-
ers and Faxes ] folder. (“n” is the
number of printers connected.)
-Disabling the Device
™ If [ Add New Hardware Wizard ] ap-
pears every time you restart the com-
puter using an operating system that
does not support SCSI print, or plug
in/take out the cable, disable the de-
vice with the following procedure:
• Windows Me
A In the [ Add New Hardware Wiz-
ard ] dialog box, confirm that
[ Windows has found the follow-
ing new Hardware: IEEE SBP-2
Device
] is displayed, and click
[ Recommended search for a bet-
ter driver [Recommended] ] , and
then click [ Next ] .
B When “Windows was unable
to locate the software for this
device.” appears, click
[ Fin-
ish ] .
™ If you do not want to install the printer
when [ Found New Hardware Wizard ]
starts when using an operating sys-
tem that supports SCSI print, disable
the device with the following proce-
dure:
• Windows 2000
A In the [ Found New Hardware
Wizard ] dialog box, click
[ Next ] .
B When “This wizard will
complete the installation for
this Device: Unknown” ap-
pears, click
[ Search for a suita-
b l e d r i v e r f o r m y d e v i c e
[recommended]
] , and then
click [ Next ] .
C When “Locate Driver Files”
appears, remove all selec-
tions from
[ Optional search lo-
cations. ] , and then click [ Next ] .
D When “Driver Files Search
Results” appears, click
[ Disa-
ble the device. The Add/Remove
Hardware Wizard in the control
panel can be used to complete
the driver installations.
] , and
then click [ Finish ] .
• Windows XP
A In the [ Found New Hardware
Wizard ] dialog box, confirm
“This wizard helps you in-
stall software for: Unknown”
is displayed, and click
[ Install
from a list on specific location
(Advanced)
] , and then click
[ Next ] .
B When “Please choose your
search and installation op-
tion.” appears, remove all se-
lections from
[ Search for the
best driver in these locations. ] ,
and then click [ Next ] .