Sayson Technologies Sayson AltiTouch 390 - Manual (Page 24)

Additional Phone
Features
Emergency Service Feature
The Sayson 390/480 will provide telephone service
during a power failure. However, only the dial pad,
ringer and handset will function. If you are on a hand-
set call during a power interruption, The Sayson
390/480 will keep the call, although the display will not
work while the power is off. Handsfree calls will not
be reestablished during a power interruption.
Dataport Operation
The Sayson 480 phone is equipped with a dataport
located on the right hand side. The dataport can be
used to connect another device such as a fax machine
or computer modem to the phone. Plug one end of a
line cord to the phone and the other end to the device
to be connected.
Note: The dataport will only operate when the handset is on
hook (in the phone base cradle).
480 special features not found on
the 390
• Headset mode: Activate headset with the touch of
a button without losing the ability to use speaker-
phone or handset. The 480 is equipped to accept
headsets with either a RJ22 or a 2.5mm standard
jack
• Security Numbers: This feature prevents selected
Sayson 390/480 for Sphericall User Guide 39
Adjusting the
Volume
Pressing the volume button adjusts the
receiver, speaker, and ringer volume.
To adjust ringer volume, leave the handset in the cradle
and press the volume button
while there is
no active call. There are eight settings for the ringer—
the display will temporarily indicate the current ringer
volume setting.
To adjust handset/headset volume, press the volume
button while you are on a call. The handset will return
to the default volume after you hang up.
To adjust speaker volume, press the volume button
while the speaker is activated (activate the speaker by
pressing
in the 390 or / in the 480).
The speaker will remain at this volume until it is adjust-
ed again.
Note: Default handset and headset volume is always set at
medium.
Sayson 390/480 for Sphericall User Guide 38