Sayson Technologies Sayson AltiTouch 390 - Manual (Page 5)

Installation and
Setup
Installation
1. Connect the handset cord
Turn the telephone over and locate the handset jack
marked
. Insert one end of the handset cord into
the jack until it clicks into place. Then route the hand-
set cord through the groove as shown in the illustra-
tion on the next page. Attach the handset to the other
end of the handset cord.
2. Attach the stand
If you plan to mount the phone on the wall you do
not need to attach the stand, so you may skip to step 3.
If you plan to use the phone on a desk, attach the
stand by inserting the tabs on the stand (marked
with
) into the slots on the bottom of the telephone.
Sayson 390/480 for Sphericall User Guide vi
Introduction
This manual covers the use of the Sayson 390 and
Sayson 480 business phones with the Sphericall phone
system from Sphere Communications. The Sayson 390
and 480 phones provide an easy-to-use interface
through its large screen and 6 softkeys. By providing
this interface, the user no longer has to remember all
the phone feature codes to perform functions such as
call handling or extension management.
This manual should be used in place of the Telephone
User Interface Quick Reference provided with the tele-
phone. Please continue to refer to the Analog Telephone
Interface Guide for all other Sayson features.
Sayson 390/480 for Sphericall User Guide
1