Sharp XG - NV6XU - Manual (Page 20)

E-19
Operation
2. Settng up the Screen Continued
Press foot releases. Adjust height of projector
and remove hands from foot
releases. Rotate feet to make minor
changes.
Using the Adjustment Feet
• The projector is adjustable up to approximately 5° from the standard position.
• When the height of the projector is adjusted, the image may become distorted (keystoned), depending on the relative
positions of the projector and the screen.
CAUTION
• Do not press the foot releases when the adjustment feet are extended without firmly holding the projector.
• Do not hold the lens when lifting or lowering the projector.
• When lowering the projector, be careful not to get your fingers caught in the area between the adjustment feet and the
projector.
Digital Lens Adjustment
Press LENS to select mode.
Each time LENS is pressed, the
screen changes in the following
order.
1
2
3
1, 4a
4b
g g g
Press ENTER to display test pattern.
Press ∂/ƒ/ß/© to make adjustments.
a. Press LENS until normal screen appears.
b. To reset the KEYSTONE setting, press UNDO .
• Straight lines and the edges of the displayed image may appear jagged, when adjusting the KEYSTONE
setting.
• Do not touch the lens when adjusting the focus or zoom.
2
3
4
1 2 3
Projector Remote control