Sharp XG - NV6XU - Manual (Page 37)

E-36
Useful Features
ON VOL
This function allows you to modify or customize the picture display mode to enhance the input image. Depending
on the input signal, you can choose NORMAL, WIDE, DOT BY DOT, DOT BY DOT (WIDE), or FIT TO SCREEN
image.
• Each time RESIZE is pressed, the picture mode changes as shown below.
Selecting the Picture Display Mode
g
NORMAL WIDE DOT BY DOT DOT BY DOT (WIDE)
For DTV decoder RGB signal in 4:3 aspect ratio.
For COMPUTER/RGB signal without 4:3 aspect ratio.
g g
For DTV decoder RGB signal in 16:9 aspect ratio.
g g
• “ FIT TO SCREEN ” is displayed only when SXGA signals that are not in 4:3 aspect ratio are input.
• DOT BY DOT mode displays images in their native resolution and not expanded to fit the LCD resolution.
• To return to NORMAL mode, press UNDO while “RESIZE” is displayed on the screen.
g
g
g
g
MODE
INPUT SIGNAL 4:3
480 P
16:9
720 P
SXGA
DTV COMPUTER
NORMAL
WIDE
DOT BY DOT
DOT BY DOT (WIDE) 1024 ן 768
1024 ן 576
640 ן 480
853 ן 480
1024 ן 576
—
1280 ן 720
—
960 ן 768
1024 ן 768
1280 ן 1024
—
RESIZE
button
Projector
EXAMPLE
Remote control