Sharp XG - NV6XU - Manual (Page 29)

E-28
Operation
This projector’s audio is factory preset to standard
settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU . Menu bar and “Picture” menu
screen appear. GUI operation guide is also
displayed.
2 Press ß/© to select “Audio”.
3 Press ∂/ƒ to select a specific adjustment item.
4 Press ß/© to move the mark of the selected
adjustment item to the desired setting.
5 To exit from the GUI, press MENU .
• To reset all adjustment items, select “Reset” on the “Audio”
menu screen and press ENTER .
Description of Adjustment Items
2, 3, 4
1, 5
Projector
© button ß button Selected item
2
3
(GUI) On-screen Display
Audio Adjustments
Increased audio from the left
speaker Increased audio from the right
speaker
For weaker treble
For weaker bass Treble
Bass
Reset For stronger treble
For stronger bass
All audio adjustment items are returned to the factory preset
settings.
Balance
MOUSE ADJ.
Remote control