Socket Mobile Pentium 4 Full Size PICMG CPU Card IB810 - Manual (Page 12)

INSTALLATIONS
8 IB810 User’s Manual
Installing the Memory
The IB810 CPU Card supports two DDR memory sockets for a
maximum total memory of 2GB in DDR memory type. The memory
module capacities supported are 64MB, 128MB, 256MB, 512MB and
1GB.
Installing and Removing Memory Modules
To install the DDR modules, locate the memory slot on the CPU card and
perform the following steps:
1. Hold the DDR module so that the two keys of the DDR module align
with those on the memory slot.
2. Gently push the DDR module in an upright position until the clips of
the slot close to hold the DDR module in place when the DDR module
touches the bottom of the slot.
3. To remove the DDR module, press the clips with both hands.
Top View of DDR Socket
DDR Module Lock Lock
Lock Lock