Specifications – Socket Mobile Pentium 4 Full Size PICMG CPU Card IB810 User Manual
Page 7
INTRODUCTION
IB810 User’s Manual
3
Specifications
Processor
Supported
Socket 478 support Intel Pentium 4
1.3GHz~2GHz, 400MHz Bus Speed
Chipset
Intel 845 Chipset
BIOS
Award BIOS
Supports ACPI
System Memory
2x DDR memory sockets support up to 2GB capacity
PC200/PC266 supported
LPC I/O Chipset
ITE IT8712 (keyboard controller is built-in)
I/O Features
1x FDD (up to 2.88MB, 3 Mode, LS120)
1x Parallel Port (EPP, ECP Port)
2x Serial Ports (1x RS232 and 1x RS232/422/485)
1x IrDA TX/RX Headers
Bus Master IDE
2x IDE interfaces for up to 4 devices; supports PIO Mode 3/4
or UDMA/33/66/100 HDD, and ATAPI CD-ROM
VGA
ATI Mobility M6 graphics controller
Embedded 8MB/16MB DDR memory
Supports TMDS (daughter card), LVDS, CRT, TV-out
Audio
ICH2 Built-in sound controller + AC97 Codec STAC9721
(Line out, Line-in, Mic with ID120 daughter card)
LAN
ICH2 integrated Ethernet controller
10Base-T / 100Base-TX protocol
Two RJ-45 on board with transformer for 2nd LAN
Optional Dual Ethernet solution via MicroPCI socket
Hardware
Monitoring
Built-in IT8712
Monitors CPU/system temperature and voltages
SSD Interface
Support M-Systems 2MB~144MB DiskOnChip flash disk
MicroPCI Socket
One MicroPCI socket supports MicroPCI daughter cards with
VGA, Ethernet, SCSI or IEEE 1394 functions.
Other Features
Pin header for 4 USB ports, 256-level Watchdog timer
ISA high drive, PCI to ISA bridge (ITE 8888)
PICMG compliance
Onboard D-type
connectors
PS/2 Mouse, PS/2 Keyboard, VGA, Two RJ-45
Power Connector
ATX 12V
System Voltage
+5V, +12V, -12V, Vcore
Form Factor
Full Size
Dimensions
338mm x 122mm (13.3” x 4.8”)