Socket Mobile Pentium 4 Full Size PICMG CPU Card IB810 - Manual (Page 76)

DRIVERS INSTALLATION
72 IB810 User’s Manual
PCI Ethernet Drivers
The first thing to do to install the Ethernet drivers is to create a floppy
diskette that would contain the drivers. Follow the steps below.
1. Insert the CD that comes with your IB810. In the initial screen, click on
LAN Card, then click on Intel PRO LAN Drivers. The following figure
will appear.
2. Choose the operating system that you are using. In this case, Windows
2000. Use the created diskette to install the Ethernet/LAN drivers.
3. Under the Windows 2000 environment, click Start à Control Panel.
Double click System à Hardware à Device Manager à Other Devices.
4. Double-click Ethernet Controller.
5. Click Driver à Update Driver à Next.
6. Now select “Display a list of the known drivers for this device so that I
can choose a specific driver.”
7. Insert the floppy diskette containing the Intel Ethernet drivers into the
FDD drive. Click OK and select “Intel PRO/100 VE Network
connection.”
8. Click Next à Next à Finish. Close all tasks and restart the computer.
NOTE: You may also directly use the floppy disks containing the
Ethernet drivers instead of creating the Install Disks from the CD.