Sony HDW-2000 - Manual (Page 24)

1-18
HDW-2000/M2000/M2000P/S2000/S2000P/M2100/M2100P, DVW-2000/2000P/M2000/M2000P
MSW-2000/A2000/A2000P/M2000/M2000P/M2000E/M2000EP/M2100/M2100P/M2100E/M2100EP
A
1
2
3
4
B C D E
S600 S700
S101 S201
1-10. Switch Settings on Circuit Boards
1 2
O N
3 4 1 2
O N
3 4
1 2
O N
3 4 1 2
O N
3 4
1-10-2. AU-272 Board (Other than HDW-2000, DVW-2000/2000P, MSW-2000)
If necessary, perform the following audio-related settings using the switches on the
AU-272 board (Suffix -12 and higher).
. Analog audio (longitudinal audio) output gain
. Analog audio (AFM) output gain
n
The AU-272 board is not used in HDW-2000, DVW-2000/2000P nor MSW-2000.
AU-272 Board (Suffix -12 and higher, Side A) < Top View >
Analog Audio output gain settings (For Betacam/Betacam SP longitudinal audio)
Channel Ref. No. Switches state ( \ \ \ \ \ : Knob position)
CH1 S101
CH2 S201
0 dB +3 dB
(Factory setting) (For increasing the gain of the longitudinal audio playback
level by
+3 dB)
Analog Audio output gain settings (For Betacam SP AFM)
Channel Ref. No. Switches state ( \ \ \ \ \ : Knob position)
CH3 S600
CH4 S700
0 dB +3 dB
(Factory setting) (For increasing the gain of the AFM playback level by +3 dB)
n
The S600 and S700 are not used in HDW-S2000/S2000P.