Re-syncing process – Star Trac Spinning Bike Computer User Manual
Page 12
9
Syncing process for when the original cadence and computer
are no longer a pair:
1.
To begin the Syncing process, press and hold Toggle and Light buttons simultaneously.
The display should now show “Conn _ _ _” on the window.
2.
Within one minute, press the Reset button on the Cadence and wave the magnet along
any of the Cadence sides.
Note: If Cadence and magnet are already mounted onto the Spinning bike, move flywheel of Spinning bike to pass
magnet by Cadence.
5.
Once the magnet passes by the Cadence (may have to pass magnet by cadence several
times), the syncing process will be confirmed when a random ID is displayed “Id xxxxx”
(i.e. Id 45896)
6.
Accept ID by pressing the Toggle button.
7.
Once the Syncing process is done, the display should start showing the Workout mode.
Re-Syncing process
Press Reset Button