Star Trac Spinning Bike Computer - Manual (Page 16)

13
Time required:
•
15 Minutes
Parts required:
•
727-0083 Spinning® Computer Kit
NOTE: The inserts and mounting bracket are not used on
the NXT or Elite 6900
Tools required:
•
M5 Allen Wrench
•
M2 Allen Wrench
1.
Install the mounting bracket to the center flat section of the handlebar by slightly prying the computer bracket
clamp open.
2.
Secure clamp down by tightening the M6x20 screw and M6 nut.
Installation Procedure Elite 6900 and NXT 7000