Star Trac Spinning Bike Computer - Manual (Page 28)

25
resistance places too much load on the knee joint and puts the hips and low back at risk. One wouldn’t perform a bicep curl
with a weight that would require the rider to throw his/her hips forward. The same applies to resistance while pedaling. A rider
must build the strength in his legs using appropriate resistance at a cadence no lower than 60 RPM. If a steep hill is the goal,
find the highest amount of resistance one can maintain while employing good form at 60 RPM without contorting the body to
turn the pedals. Remember, 60 RPM is one revolution of the pedals per second.
TIPS FOR CHOOSING AN APPROPRIATE CADENCE AND RESISTANCE
1. Warm-Up. The first ten minutes of a Spinning ride are critical for establishing proper cadence. With no resistance
during warm-up, one may tend to pedal too quickly thus raising the heart rates prematurely. During the warm-up, it’s
important to work on cadence by keeping intensity under control (65% or less). Use the warm-up to establish a smooth
cadence and gradually establish a balanced intensity. Similarly, after the warm-up, be cautious of increasing cadence
over 100
RPM with light resistance (this will also cause a potential anaerobic event and one may spend the remaining
class time attempting to recover). In other words, if one chooses to climb after the warm-up, ensure that intensity and
cadence are increasing equally.
2. Resistance. Resistance is good. Some riders are afraid to add resistance because they think they’ll end up with
bulging quadriceps. But in cycling, it is the sprinters who have the larger quadriceps (high cadences, lower resistance),
and the skilled climbers generally have the longer, leaner legs (lower cadences, higher resistance).
3. Intensity. Slower cadence does not necessarily mean lower intensity. Perhaps a rider feels that if he/she slows down
the
RPM his/her heart rate will drop too low. But in fact, he/she is in control of the intensity because he/she can add
resistance as needed. Subtle turns of the knob should eventually generate the required response. Wearing a heart rate
strap is critical to monitor one’s intensity goals using the right combination of cadence and resistance.
4. Putting it Together. Cadence and resistance are inversely related. The next section will explain how cadence and
resistance work together to elicit a given intensity. With this understanding, one can coach others to select the
appropriate resistance and cadence for the terrain they have selected.