Konica Minolta BIZHUB C30P - Manual (Page 188)

Cleaning the Printer 174
Cleaning the Laser Lens
This printer is constructed with four laser lenses. Clean all lenses as
described below. The laser lens cleaning tool should be attached to the inside
of the front cover.
1
Open the printer’s front cover
and remove the cleaning tool
from the machine’s front cover.
2
Insert the laser lens cleaning
tool into the laser lens cleaning
opening, pull it out, and then
repeat this back and forth move-
ment 2 or 3 times.
3
Clean between each of the laser
lenses in the same way.
"
The laser lens cleaning tool
is included with the printer.
Safely store the laser lens
cleaning tool so that it will not
be lost.
4
Return the laser lens cleaning tool to its holder on the inside of the front
cover.
5
Close the front cover.