Konica Minolta BIZHUB C30P - Manual (Page 244)

Hard Disk Kit 230
Hard Disk Kit
If a hard disk drive is installed, fonts can be downloaded and saved, and the
overlay function can be used.
Installing the Hard Disk drive
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 226. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
2
Using a screwdriver, remove the
screw. Then, slide the rear cover
to the right and remove it.