Konica Minolta BIZHUB C30P - Manual (Page 96)

Configuration Menu Overview 82
PAPER
TYPE
Settings
PLAIN PAPER /
RECYCLED/THICK 1/
THICK 2/LABEL/
TRANSPARENCY/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2
Select the type of media that is normally
used.
UNIT
OF
MEA-
SURE
Settings
INCHES/MILLIMETERS
The units for specifying the size of custom media can
be switched between inches and millimeters.
GRAY
SCALE
PAGE
Settings
AUTO /GRAYSCALE PRINT/COLOR PRINT
Specify the operation to be performed for black-and-white
pages in a job specified for color printing.
If AUTO is selected, printing is automatically performed accord-
ing to the first page of the job.
If GRAYSCALE PRINT is selected, black-and-white printing is
automatically performed depending on each page.
If COLOR PRINT is selected, color printing is performed, even
for a black-and-white page.
STARTUP
OPTIONS
DO
START-
UP
PAGE
Settings
ON/OFF
Select whether or not a startup page is printed when
the printer is turned on.
AUTO
CON-
TINUE
Settings
ON/OFF
Select whether or not printing continues if the size or type of
media in the selected tray is different from the size or type of
media for the print job.
If AUTO CONTINUE is set to ON , printing automatically contin-
ues after about 10 seconds under the following conditions. At
this time, printing will be performed even if the media size is dif-
ferent.
No media: PAPER EMPTY (Page 220)/TRAY EMPTY (Page
222)
Different media size/type: PAPER ERROR (Page 220)/TRAY x
PAPER ERR (Page 222)