KORG TRINITY HDR-TRI - Manual (Page 20)

Creating a song in conjunction with the MIDI sequencer
17
Introduction
Operation
Parameters
Appendix
2 levels.
If you check the check box located at the left of the display, the right side output
of effect 1 will be sent to effect 2, and effects 1 and 2 will be mixed. Refer to the
Parameter Guide for details on the P8 tab 1 page (Master FX), and to the Effect
Guide for an explanation of the settings of the master effects.
Creating a song in conjunction with the MIDI
sequencer
This section explains how to record a vocal on audio track 1 to the accompani-
ment of the MIDI sequencer.
Recording the vocal
1 Access the Sequencer mode P1 tab 5 page (ATrkRec).
2 In the Song field, select the song that will provide the accompaniment.
3 For the Track setting, select the desired audio track (AT1 in this example).
Make sure that the Audio Track Display shows the selected audio track.
4 If you wish to hear the metronome as you record, set Metronome to On or Rec (to
hear it only during recording), and make Metronome settings for Precount, Out-
put, and Level in the tab 7 page (Preference).
With a metronome Output setting of L, L+R, or R, the metronome sound will be
output from the headphone jack and from output jacks 1/L/MONO and 2/R.
With a metronome Output setting of Send 1, Send 1+2, or Send 2, the metro-
nome sound will be output from output jacks 3 and 4.
5 In the Take field, assign a take name.
6 If you want a number to be added at the end of the take name to distinguish
takes, check the Take No. box.
Checking the external input
7 Access the Sequencer mode P1 tab 5 page (ATrkRec).
8 Set the Input Select to Analog.
9 For the Input Level, select a level appropriate for the device that is connected (–10
dBu) for this example, and sing into the mic while you adjust the Rec Level so that
the meter does not go all the way.
If the Input Level indicates Overload, the input level is too high. If this occurs,
2
1
3
4
5
6