KORG TRINITY HDR-TRI - Manual (Page 33)

Sequencer P2
30
Sequencer P2
2–5: Audio Track parameter (Audio Track 1–4)
Here you can specify the song name, the scale used by MIDI tracks, and the
delay for each audio track.
2–5c: Delay [0...255 samples/0...5 ms]
Specify the time delay from the location of an audio track event until when the
sound is heard from the
TRINITY during playback.
This can be set in units of either samples or milliseconds.
Normally you will leave this set at 0.
Page Menu Command
2–5D: Rec HD Select
Select the hard disk on which recording will take place.
The Free Time (remaining time for recording) will also be displayed here.
For the procedure, refer to “1–5D: Rec HD Select.”
2–5D
2–5c
Page Menu
Data for the selected
audio track