Kodak NOVAJET 750 - Manual (Page 2)

NJ750 Training Guide
2
Installed needle assembly
Do not break connection when installing
new cartridge
25 ml inside - preprimed
A. Ink Installation
1. ‘Plug and Play Cartridge’ characteristics
2. Installing ink into reservoirs
It is suggested to fill reservoirs over a table to prevent spills on printer; fill to a
maximum of 400 ml (50 ml minimum).
3. Attach septum fitting to valve body. Prime line (and cartridge if
necessary).
NOTE:
When the valve body is raised to the up
position ink flow is cut off, when the valve body (latch)
is closed then the ink line is open.