Kodak NOVAJET 750 - Manual (Page 25)

NJ750 Training Guide
25
Configuration for Windows 2000/XP
Printer Networking is a basically a 3-step Process:
1. Assign TCP/IP address of host computer/server
2. Assign TCP/IP address to print server (may also need to install windows
printer port during this process)
3. Assign TCP/IP address to RIP (same as print server)
For the most recent software version (i.e. InterCon NetTool) go
to the following URL:
http://www.seh.de/
NOTE: The most common download, for PC users, from SUPPORT -
FIRMWARE/SOFTWARE (select IC105 FastPocket-TX) is:
Version 1.8.23 for Win 2000, Win XP, Win 9x
Administration tool for InterCon print servers.