G. print server networking – Kodak NOVAJET 750 User Manual
Page 24
NJ750 Training Guide
24
Received IP Address
192.168.002.010
Ok
G. Print Server Networking
(SEH Intercon print server)
A. The 100baseTX parallel print device allows connection between a 100
baseTX network environment and the NovaJet 750. The SEH print server draws
power directly from the printer’s parallel port.
"
High speed print server; 1 Mbytes/sec data rate
(compliant with IEEE 1284)
"
Powered by parallel port
"
ECP mode support
"
Protocols; IPX/SPX, TCP/IP, WINS, BCP/TBCP,
NetBIOS/SMB, IPP, DNS, SLP, SNMP, SMTP,
Ethernet/Token Talk Phase 2, HTTP/HTML
"
Operating Systems; Novell Netware 3.x – 5.x, UNIX, BS2000, Apple MacOS 7.x – 9.x,
Microsoft Windows 3.X, 95/98, NT 4.X, 2000, XP
"
Easy Installation and Simple Management
"
JetAdmin, WebJetAdmin, and EpsonNet Tools Support
B. Depressing the blue test button (located on side of server) sends the currently
loaded IP address to printer to be displayed on the printer’s control panel.
C. The Status and Link LED’s
(green in color)
should be steady when the printer
has been turned on and a properly configured network connection has been
established. The Status LED will blink until the server is configured properly in
the proper IP range of the device (could be dependent of the HUB’s or Network
Interface Card’s IP range).
The Activity LED
(amber in
color)
will only blink while
the server receives data
from the host computer
(typically blinks during
printing).
D. Print Server