Bluetooth setup – Kenwood KDC-HD545U User Manual
Page 22
22
|
KDC-BT645U/ KDC-HD545U
Bluetooth Setup
Function of KDC-BT645U
KDC-HD545U with KCA-BT200 (Optional Accessory)
Bluetooth Setup
You can select following Bluetooth Setup items.
1
Enter Bluetooth mode
KDC-BT645U: Press the [VOL] knob.
KDC-HD545U: Press the [VOL] knob for at least
1 second.
“BT MODE” is displayed.
2
Enter Function Setting mode
KDC-BT645U: Press the [VOL] knob for at least
1 second.
KDC-HD545U: Press the [VOL] knob.
“FUNCTION” is displayed.
3
Select the function item
Turn the [VOL] knob and it when the desired
item is displayed.
Select “SETTINGS”
>
Function item or select
“SETTINGS”
>
“DETAILED SET”
>
>
Function item.
Function item
Selectable setting/item
“PHONE SELECT”
Selects a cell-phone or Bluetooth audio player*
connection. Refer to <Selecting the Bluetooth
Device You Wish to Connect> (page 25).
“AUDIO SELECT”**
“SMS DOWNLOAD”
Download a short message. Refer to
<Downloading the SMS> (page 25).
“SMS INBOX”
Display the received short message. Refer to
<SMS (Short Message Service)> (page 26).
“VOICE TAG”
Registers voice for voice recognition and
voice to select the Phone number category in
Phone book. Refer to <Adding a Voice Dialing
Command> (page 26) and <Setting a Voice
Command for Category> (page 27).
“DETAILED SET”
Move to detailed item.
“DEVICE REGIST” Registers a Bluetooth device (pairing).
Refer to <Registering Bluetooth Device>
(page 23).
“S-DVC SELECT”
“DEVICE DELETE” Cancel registration of the Bluetooth device. Refer
to <Deleting a Registered Bluetooth Device>
(page 23).
“PIN CODE EDIT”
Specify the PIN code required when registering
this unit using the Bluetooth device. Refer to
<Registering PIN Code> (page 24).
“AUTO ANSWER” This function automatically answers (responds
to) a call after lapse of the preset time interval
for automatic answer.
OFF: Does not answer the phone call
automatically.
0: Automatically answers the phone call at once.
1 – 8 –99: Automatically answers the phone
call after lapse of 1 – 99 seconds.
“BT SP SELECT”
You can specify the audio output speakers.
Select the speaker which is further from the
microphone in order to prevent howling or
echoes.
SP FRONT: Outputs audio from the front-left and
front-right speakers.
SP ALL: Outputs audio from the all speakers.
“CALL BEEP”
You can output a beep from the speaker when a
call comes in.
ON: Beep is heard.
OFF: Beep is canceled
“BT F/W UPDATE” Display the firmware version and update the
firmware. Refer to <Displaying the Firmware
Version> (page 24).
“MIC GAIN”*
Adjust the sensitivity of the built-in microphone
for a telephone call. Adjust the voice of caller.
Setting to “+” increases the voice volume.
–3 – 0 – +3
“NR LEVEL”*
Reduce the noises generated by surrounding
environment without changing the built-in
microphone volume. Adjust the voice of caller
when it is not clear. Setting to “+” increases the
noise reduction.
–3 – 0 – +3
“EC LEVEL”*
Adjust the level of echo cancellation. Setting to
“+” increases the echo cancel reduction.
–2 – 0 – +2
*KDC-BT645U only
**KDC-HD545U with KCA-BT200 (Optional Accessory) only
(Factory setting: Underlined)
4
Make a setting
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Exit Function Setting mode
Press the [
] button for at least 1 second.
[SRC] [VOL]
[
] / [
E
]
[
]
[DISP]
[
]
$AA-KPFD