Kenwood KDC-HD545U - Manual (Page 27)

English | 27
Select “PB NAME CHK” (Play)
6 Press the [VOL] knob.
Play the registered voice and return to step 3.
Select “PB NAME DEL” (Delete)
6 Delete a voice tag
Press the [VOL] knob.
Exit Phone book name edit mode
Press the [ ] button for at least 1 second.
⁄
• Audio sound is not output during voice tag registration.
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1 Select Phone Number type edit mode
For how to select setup item, refer to <Bluetooth
Setup> (page 22).
Select “SETTINGS”
> “VOICE TAG”.
2 Enter Voice Tag edit mode
Press the [VOL] knob.
3 Enter Phone Number type edit mode
Turn the [VOL] knob to select “PN TYPE EDIT”,
and then press the [VOL] knob.
4 Select the category (type) you wish to set
Turn the [VOL] knob and press it when the
desired category name is displayed.
“GENERAL”/ “HOME”/ “OFFICE”/ “MOBILE”/ “OTHER”
5 Select a mode
Turn the [VOL] knob.
Display Operation
“PN TYPE REG” Register a voice tag.
“PN TYPE CHK”* Play a voice tag.
“PN TYPE DEL”* Delete a voice tag.
“RETURN” Return to step 3.
* Displayed only when a name for which a voice tag has
been registered is selected.
* KDC-HD545U with KCA-BT200 (Optional Accessory) only.
6 Register the category (type) by performing
steps 6 to 8 of select “PB NAME REG” (Register)
in <Adding a Voice Dialing Command> (page 26).
7 Exit Function Setting mode
Press the [ ] button for at least 1 second.
⁄
• Set the voice tag for all the 5 categories. If the voice tag
is not registered for all the categories, the Phone book
may not be recalled by voice command.
$AA-KPFD