Satellite radio tuner control (optional accessory) – Kenwood KDC-HD545U User Manual
Page 28
28
|
KDC-BT645U/ KDC-HD545U
Satellite Radio Tuner Control (Optional Accessory)
Basic Operation
Selecting Satellite Radio source
Press the [SRC] button.
Select the “SAT”/ “SIRIUS”/ “XM” display.
⁄
• You need to register to the service provider to receive
the service by Satellite Radio. Consult the service
provider if “CALL … TO SUBSCRIBE” appears.
• The radio may take a little time to start receiving after
you select the Satellite Radio source.
• If the signal reception fails, “ACQUIRING SIGNAL”/ “NO
SIGNAL” appears.
Selecting the Preset Band
Press the [BAND] button.
Each time you press the button, the receiving band
alternates between the SR1, SR2, SR3 and SR4.
Selecting the channel
Press the [
4] or [¢] button.
Selecting the preset channel
Press the [1] – [6] button.
Preset Memory
Putting the channel in the memory.
1
Select the frequency to put in the memory
Press the [
4] or [¢] button.
2
Select the number to put in the memory
Press the [1] – [6] button for at least 2 seconds.
⁄
• Only the channel number is stored. Category information
is not stored.
Satellite Radio Setting
You can select following Satellite Radio Setting
items.
1
Select the Satellite Radio source
Press the [SRC] button.
Select the “SAT”/ “SIRIUS”/ “XM” display.
2
Enter Function Setting mode
KDC-BT645U: Press the [VOL] knob for at least
1 second.
KDC-HD545U: Press the [VOL] knob.
“FUNCTION” is displayed.
3
Select the function item
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “SETTINGS”
>
Function item.
Function item
Selectable setting/item
“SEEK MODE”
Selects the tuning mode of the radio.
CHANNEL: Normal manual seeking control.
PRESET: Search in order of the channels in the
Preset memory
“ESN WATCH”
Displays the Electronic Serial Number of satellite
radio.
ESN=
(Factory setting: Underlined)
4
Make a setting
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Exit Function Setting mode
Press the [
] button for at least 1 second.
Category and Channel Search
Selecting the channel and category you want to
receive.
1
Enter Category and Channel Search mode
Press the [
] button.
2
Select the Category
Press the [VOL] knob.
3
Select the Channel
Turn the [VOL] knob and press it when the
desired item is displayed.
Cancelling Category and Channel Search mode
Press the [
] button for at least 1 second.
[SRC] [VOL]
[1]
—
[6]
[
] / [
E
]
[
]
[
]
[BAND]
$AA-KPFD