Kodak Printe - Manual (Page 22)

Printing 3
The way you print from your computer depends on the driver or RIP you have installed.
Your printer comes with a Windows driver and one RIP:
• Windows driver for general use
• EFPU
• Flexibanner (trial version)
Printing a file
The Windows driver allows you to print from virtually any Windows-based application.
➪
To print a file using the Windows driver
1 Open the file from within an application.
2 Choose File/Print.
3 Select your printer.
4 Click Features.
5 From here, Page Setup and Advanced tabs allow you to adjust printer specific
options for your print file. Generally, you should only need to set paper size and
orientation options.
6 Click OK, then click OK again to send your file to the printer.
Notes about printing
Print only on untreated vinyl. This printer is not intended for printing on coated vinyl or
other media.
This printer is not designed for unattended operation. Be sure that the media weight bar is
placed on the media as shown in the Quick Start Guide. This keeps the media the correct
distance from the IR bulb and helps to assure proper ink curing.