Kodak Printe - Manual (Page 30)

HP-GL/2 4-7
VinylJet 36 TM Reference Guide
Ink limit
The printer can assign an ink limit to polygon fills and wide vectors. This helps
prevent bleeding. The default for this option is On. If you are using high quality
media, this option may not be needed and can be turned off.
➪
To enable the ink limit
1 From the main menu, choose Setup Menu /HP-GL/2 Options/Ink Limit.
2 Press Select.
3 Use the up or down arrow button to display ON.
4 Press Select.