Kodak Printe - Manual (Page 39)

Menu Tree B-7
VInylJet 36 TM Reference Manual
Ink Option Menu
Ink reduction (applies to HPGL/2 only) provides access to a further menu in which to
set the percentage by which to decrease the amount of ink emitted to
help prevent bleeding or pooling of ink. Options are 0, 12.5, 25, 37.5,
and 50.
Ink preheat provides access to a further menu in which you can select the car-
tridge for which you want to set the preheat value. Then you can set
the ink preheat value for each cartridge. Options are -7 (off) to 7 (max)
(default = 0).
EOP_Dry EOP (End of page drying) ON enables the printer at the completion of
the print job to automatically advance the media at the printing speed
12 inches to fully pass the IR heater. The media is then fed back into
the printer at 25% of the normal reserve speed to avoid cockling on
the retract move. End of Page dry OFF does not perform this at job
completion and should be used when multiple copies are being
printed.
Exit returns to the Setup menu.