Hd view 6 – Key Digital KD-DA6 User Manual
Page 10
* Since the KD-DA6 and the KD-CDA12 are powered
devices they will produce a minimal amount of
heat, therefore it is recommended to leave enough
room around the unit to dissipate this heat. *
Troubleshooting:
If, after properly connecting all of the devices in the
system, the unit fails to properly distribute the
“Source” signal, try any of the suggestions below.
No power to the unit.
Make sure that the external power supply is properly
connected to a standard 110V household outlet.
Check to make sure the power indicator light is
green. If there is no power light, check and verify
that the wall outlet is active by plugging in a known
good component (like a desk lamp). * For added
safety and protection it is always recommended to
use a good quality surge protector. *
Check to make sure that the power connector is
properly inserted into the KD-DA6 or KD-CDA12.
Unplug the adapter from the wall and verify the cable
to make sure that the cable is not cut or interrupted
anywhere.
If none of the above works, please contact Key
Digital technical support hotline at (888) 258-2028
or send an e-mail to
Page 10
HD View 6
OP E R AT ING IN S T R U C T ION S
Model KD-DA6