Key Digital KD-DA6 - Manual (Page 9)

_1 2 3 4 _5 _6 7 8
SW1 OFF ON ON OFF ON ON ON OFF
_________________________________________________________________________________________________
_
SW2 OFF ON ON OFF ON ON OFF ON
* Please refer to the illustration for NX12 Daisy
Chain.*
* Note: The factory default setting of the dip-
switched is 2x6 mode! *
Now that all the installation is done it is recommend-
ed to double check all connections before connect-
ing the external power supply. Once every connec-
tion has been verifiwed, plug the external power sup-
ply connector into the power input jack of the KD-
DA6 or KD-CDA12. Once power has been applied, a
green light should show the power “ON” status on
the front of the unit. Use a reliable “Source” to test
your connections (Like a DVD player).
Mounting and Maintenance instructions:
TheKD-DA6 and KD-CDA12 are built for years of trou-
ble free operation. This unit can be installed in any
Home theater, showroom or other configuration.
Often the KD-DA6 or KD-CDA12 is moved to the back
or behind the other AV “Source” devices. Cleaning or
the maintenance is not necessary, if needed use a
soft non-abrasive dry cloth to wipe the dust from the
unit.
Page 9
HD View12
OP E R AT ING IN S T R U C T ION S
Model KD-CDA12