Key Digital KD-DA6 - Manual (Page 5)

input signal to all of the output connectors (the com-
ponent video and audio output connectors are
marked “output” the KD-DA6 has one bank of 6
(Marked 1 through 6) sets of output connectors. The
KD-CDA12 has two banks (Marked Channel 1 and 2,
each corresponding to their respective inputs) of 6
each output connectors. Each of the RCATM-style
connectors are conveniently color coded to match
most “Source” and “Display” devices available in the
consumer industry; Red, Green and Blue for
Component video; White, and Red for left and right
audio respectively (PCM audio can be distributed
using either the left or right audio channel). When
applicable, connecting the KD-DA6 and the KD-CDA12
is as simple as matching the proper color coded con-
nectors.
*When inserting the RCATM style connectors use a
slight twisting motion when inserting the cables, this
assures a proper connection by seating the RCSTM
connector all the way in. *
*Be careful not to confuse the Red lead of a compo-
nent video cable with the Right or Red audio channel.
Most often the audio wire is of thinner gauge wire
and is together with the White or Left audio lead! The
Red lead from the component video cable is often
attached to the Green and Blue lead from the compo-
nent cable as well. *
* When running long lengths of cable please make
Page 5
HD View12
OP E R AT ING IN S T R U C T ION S
Model KD-CDA12