Kyocera Neo E1100 - Manual (Page 56)

56 Convenience
Enable 1-Touch Dialing
The 1-Touch Dialing feature is the fastest way to
call a speed dial location. To call a contact with
speed dial, press and hold the speed dialing
location. If it is a two-digit location, press the first
digit briefly, then press and hold the second digit.
Note: To use 1-Touch dialing, you must enable
1-Touch dialing on your phone and have a speed
dial location assigned to a contact.
To turn on 1-touch dialing:
Select Menu > Settings > Convenience >
1-Touch Dialing > Enabled .
Hold Call
Enable Hold Call
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them.
Note: The Hold Call feature will not work if the
Open to Answer feature is enabled. See “Enable
Open to Answer” on page 57.
1. Select Menu > Settings > Convenience >
Hold Call > Enabled .
If you have not recorded a hold message, you
will be prompted to record one, such as
“Please hold. I’ll answer in a minute.”
2. Record the message twice, as prompted.
3. Select Save to save the message or Options
and one of the following:
– Play to replay your message.
– Re-Record to record your
message again.
– Exit to exit.
The next time a call comes in, you will have the
option of placing it on hold.
Place a Call on Hold
You can place a call on hold once you have
enabled this feature.
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. It will go to voicemail.
When a call comes in, do the following:
1. Select Options > Hold Call . The caller will
be placed on hold and will hear your
recorded hold message.
2. Select Answer to speak to the caller on hold
or End Call to hang up without speaking.
Change Hold Call Message
1. Select Menu > Settings > Convenience >
Hold Call > Re-Record Msg .
2. Record the message twice, as prompted.
3. Select Save to save the message or Options
and one of the following:
– Play to replay your message.
– Re-Record to record your
message again.
– Exit to exit.