Kyocera Neo E1100 - Manual (Page 58)

58 Voice Features
Set Expert Mode
When expert mode is used, instead of speaking a
command following the initial voice prompts, you
can speak the command after you hear a tone.
Select Menu > Settings > Voice Features >
Expert Mode and one of the following:
• Normal sets phone to default voice prompts.
• Expert sets phone to sound tones instead of
voice prompts.
Set Display Results
You can set the phone to display up to three
recognition contacts when calling or searching
for a contact with voice commands.
Select Menu > Settings > Voice Features >
Display Results > Single Best or Three Best .
Set Digit Lengths
You can set the number of digits used for a phone
number in your voice dial list.
Select Menu > Settings > Voice Features >
Digit Lengths and one of the following:
• North American allows 7, 10, and
1 + 10 digits in a phone number.
• Permit All allows 4-14 digits in a
phone number.
Voice Answer
Enable Voice Answer
You can set your phone to answer a call with your
voice when using a headset.
1. Disable the Auto-Answer feature,
see “Enable Auto-Answer” on page 59.
2. Set the phone to normal sounds,
see “Set Ringer Mode” on page 51.
3. Set the phone to play sound from
the headset, see “Set Headset Sounds” on
page 59.
4. Select Menu > Settings > Voice Features >
Voice Answer > With Accessory .
Use Voice Answer
When you receive an incoming call, the phone
prompts you with a voice recording. If the caller
is recognized as a contact entry in your phone,
then the phone prompts “Incoming call from
(Name), answer?” Do one of the following:
• Say “Yes” or press any except the
End key to
answer the call.
• Say “No” or press the End key to ignore
the call.
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.