Kyocera Neo E1100 - Manual (Page 69)

User Guide 69
4. Enter the second number. Press the OK
key to perform the operation. The result
is shown.
5. Select Exit to return to menu or Options and
one of the following:
– MS clears value currently stored and
adds the displayed result to value stored
in memory.
– M+ adds displayed result to the value
stored in memory.
– MR displays currently stored value on
the screen.
– MC clears value currently stored
in memory.
Use Timer
The Timer counts down for the specified time.
It beeps when that amount of time has elapsed.
1. Select Menu > Tools > Timer > Set .
2. Enter the first number.
3. Enter the time length.
– Scroll left or right to move between
hours, minutes and seconds fields.
– Scroll up or down to change hours,
minutes and seconds.
4. If needed, select Sound and one of the
sounds to change the sound.
5. To work the timer, select the
following options:
– Start begins the countdown.
– Stop pauses the countdown.
– Reset clears the timer.
When the countdown is complete select Off to
silence the alarm.
Use Stopwatch
The Stopwatch counts time for you.
1. Select Menu > Tools > Stopwatch .
2. To work the stopwatch, select the
following options:
– Start begins counting.
– Stop pauses couting.
– Reset clears the stopwatch.
Press the Back key to return to the menu.
Memopad
Write memos on your phone.
Write a Memo
To write a memo:
1. Select Menu > Tools > Memopad >
New Memo .
2. Enter the memo.
3. Select Save .