Kyocera Neo E1100 - Manual (Page 78)

78 Voice Dial List
13 Voice Commands
Voice commands allow you to call a contact, dial a
phone number, access menus, or find contact
information from your voice dial list.
Note: You cannot use voice recognition to end a
call; you must press the
End key when the flip is
open.
Voice Dial List
To call or find a contact using voice dial you must
add the contact to your voice dial list. The contact
name must not have more than three words or
components in a contact name for voice dialing
recognition.
Add Contacts
To call or find a contact using voice dial you
must add the contact to your voice dial list. The
contact name must not have more than three
words or components in a contact name for
voice dialing recognition.
To add a contact to your voice dial list:
1. Select Menu > Contacts > Voice Dial List .
2. At the contact list, highlight a contact
and press the
OK key. A check mark
appears next to a name when voice dialing
is active. Check each name you wish use
with voice dialing.
3. Select Save .
Remove Contacts
To remove a contact from your voice dial list:
1. Select Menu > Contacts > Voice Dial List .
2. At the contact list, highlight a check marked
contact and press the
OK key. No check
mark appears next to a name when voice
dialing is inactive. Uncheck each name you
wish remove from voice dialing.
3. Select Save .
Voice Commands
Start Voice Commands
1. From the home screen, press and hold the
Send key to initiate voice commands. The
phone prompts, “Say a command”.
2. Say one of the following commands and
following the voice prompts.
– “ Contact <name> ” sends call to a
contact on your voice dial list.
– “ Dial Number <number> ” sends call by
speaking the digits of the phone number.
– “ <shortcut name> ” sends you to a
menu item.
– “ Find Contact ” allows you to find a
contact from your voice dial list.