Basic secrion, Basic use method, 1 power on (off) – Kenwood HD-7 User Manual
Page 16: Select the source to be listened to, Adjust the volume, Listening through headphone, Basic, One-touch operation function, Cd 6 key, tuner/band key, aux/tape key, Cd ) tuner ™ aux/tape
HD-7/EN
16
Basic
Basic use method
DOWN
UP
VOLUME
1
POWER
2
4
5
6
7
8
9
0
+10
3
SET
ENTER
DISPLAY
TIME
CLEAR
TUNER/BAND
AUX
/TAPE
CD
6
1
¡
4
¢
7
P.CALL
TUNING
DOWN
SLEEP
REPEAT
RANDOM
P.MODE
TIMER
SOUND
MUTE
UP
STOP
AUTO/MONO
II
1
1
2
2
3
3
sound
phones
source
direct
3
2
1
MUTE
SOUND
1 Power ON (OFF)
When the power is ON and the key is pressed, the power be-
comes OFF (standby).
It takes a little time from power OFF operation until the power is
switched off.
÷ For about five seconds after power ON, mute (no sound) status is
applied for circuit protection.
One-touch operation function
When one of the following keys is operated in power OFF (standby) con-
dition, the power will be switched on, the source will be selected, and
playback will start in case of CD.
CD
6 key, TUNER/BAND key, AUX/TAPE key.
2. Select the source to be listened to.
CD
)
TUNER
™
AUX/TAPE
¢
L
R
30 10
5
3
1
0 (–dB)
DIGITAL
* The source can also be selected by pressing TUNER/BAND, CD
6, or
AUX/TAPE on the remote control. (Playback will start automatically
when CD
6 is pressed.)
3. Adjust the volume.
÷ Rapid turning produces a
large change in volume. (AI
VOLUME function)
÷ A guide value (0 to MAX) is shown on the display.
L
R
30 10
5
3
1
0 (–dB)
DIGITAL
Listening through headphone
÷ Insert the headphone plug into the headphone jack.
÷ The sound from all speakers are cut off.
÷ Turn the volume/multi control knob to adjust the volume.
÷ Lower the volume before you connect or disconnect plugs.
÷ Headphone with a stereo mini plug can be connected.
Decrease
Increase