Kenwood HD-7 - Manual (Page 30)

HD-7/EN
30
Application
Various CD playback features
Listening to the desired sequence (program playback)
It is possible to listen to selected tracks from a disc in the desired order. (Max. 32 tracks)
Set the source CD in advance to stop status.
)
Remote control unit only
1 Press the "P.MODE" key
2 Pres the numeric keys or the
4, ¢ key to select the track.
3 Press the "SET" key to confirm
the selected track.
4 Repeat the steps 2 to 3 to con-
tinue programming.
5 Press the CD 6 key to start
program playback.
P.MODE
1 2
4 5 6
7 8 9
0 +10
3
SET
CD
6
÷ "PGM" will light and PGM
mode will be reached.
÷ Return to the original status is made when
no operation is performed within 20 seconds.
÷ When no operation is performed for some
time after confirmation, program stop status
will be reached. To continue programming,
follow the procedure for "To add a track to an
existing program".
÷ Up to 32 tracks can be programed. When
"PGM FULL" is displayed, no more tracks
can be programed.
÷ If you made a mistake, press the CLEAR key
and enter the track No. again.
÷ When a track No. is entered, the track will be
added to the end of the existing program.
÷ Tracks will be played in the order they were
programed (following the program num-
bers).
÷ When the "REPEAT" key is pressed during
PGM mode playback or stop, the PGM mode
playback can be repeated.
PGM
Lit
PGM
L
R
30 10 5 3 1 0 (–dB)
DIGITAL
PGM
L
R
30 10 5 3 1 0 (–dB)
DIGITAL
PGM
L
R
30 10 5 3 1 0 (–dB)
DIGITAL