Specifications, Main unit, Speakers – Kenwood HD-7 User Manual

Page 44: For your records

Advertising
background image

HD-7/EN

44

Application

Specifications

[Amplifier section]

(For U.S.A. and Canada)
Rated output power during STEREO operation (FTC)

(For U.K. and Europe)
Effective output power during STEREO operation

(1 kHz, 10% T.H.D., at 6 ) ................. 35 W + 35 W

Rated output power during STEREO operation (DIN)

(1 kHz, 0.7% T.H.D., at 6 ) ................. 25W + 25 W

Total harmonic distortion

(1 kHz, 17.5W, at 6 ) .................................... 0.008%

Frequency response ........ 30Hz ~ 100kHz (+0dB, -3dB)

[CD player section]

Laser

....................................... Semiconductor laser

D/A Conversion ...............................................................

1 Bit D/A converter achieving a 24bit resolution

Over sampling ....................................... 8 fs (352.8 kHz)
Frequency response ....... 20Hz ~ 20kHz (+0.5dB, -1dB)
Signal to noise ratio .............................................. 98dB
Digital output

Optical .......................................... -15dBm ~ -21dBm

[Tuner section]

FM tuner section

Tuning frequency range ......... 87.5 MHz ~ 108 MHz

AM tuner section

(For U.S.A. and Canada)

Tuning frequency range .......... 530 kHz ~ 1,700 kHz

(For U.K. and Europe)

Tuning frequency range .......... 531 kHz ~ 1,602 kHz

Main unit

Enclosure ... Bass-reflex type (Magnetically shielded)
Speaker configuration

Woofer ...................................... 120 mm, cone type
Tweeter ..................................... 25 mm, dome type

Impedance ................................................................ 6
Maximum input power ......................................... 60 W
Dimensions .................................... W: 155 mm (6-1/8”)

........................................................

H : 270 mm (10-5/8”)

........................................................

D : 263 mm (10-3/8”)

Weight (net) ................................ 4.5kg (9.9 lb) (1 piece)

KENWOOD follows a policy of continuous ad-

vancements in development. For this reason

specifications may be changed without notice.
÷ Sufficient performance may not be exhibited

at extremely cold locations (where water

freezes).

Speakers

22 watts per channel minimum RMS, both chan-
nels driven, at 6
from 40 Hz to 20 kHz with no
more than 0.7% total harmonic distortion.

[General]

Power consumption .............................................. 80 W
Dimensions ............................... W : 220 mm (8-11/16”)

....................................................

H : 145 mm (5-11/16”)

....................................................

D : 356 mm (14”)

Weight (net) ........................................... 5.9 kg (13.0 lb)

For your records

Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for informa-
tion or service on this product.
Model

Serial Number

Advertising