Kenwood HD-7 - Manual (Page 17)

HD-7/EN
17
Basic
Muting the sound temporarily
MUTE
÷ Press again to resume the original volume.
÷ This is also canceled when the volume is changed.
MUTE
Blinks
Adjust the left/right volume balance
1 Select "BALANCE" as follows.
1 Press the "menu" key.
2 Select "BALANCE" with the
"volume/multi control" knob.
When the "volume/multi control "
knob is turned, switching is done
as follows.
"AUX INPUT ?"
"TONE ?"
"BALANCE ?"
"TIME ADJUST ?"
"TIMER SET ?"
"A.P.S. SET ?"
"DIMMER ?"
Return to the original status is
made when no operation is per-
formed within 20 seconds.
2 Press the "set" key.
2 Adjust the left/right volume balance with
the "volume/multi" control knob.
The right volume
decreases. The left volume
decreases.
2 Press the "set" key.
Remote control unit only
Main unit only
Listening to the original sound of the
source (source direct)
The sound from CD or another source can be heard
as faithful as possible to the original sound by not
passing it though the sound adjustment circuits
of this unit.
1 Press the "sound" key repeatedly to select
"S.DIRECT".
Each press switches the modes as follows.
"N.B.1"
"N.B.2"
* "TONE 1"
* "TONE 2"
* "TONE 3"
"SOURCE DIRECT"
"SOUND MODE OFF"
* "TONE 1(2,3)" is not displayed when "BASS"
and "TREBLE" both are set to "0".
S.DIRECT
Lit
÷ When source direct is selected, N.B1, N.B2,
and TONE1, TONE2, TONE3 are cancelled.
÷ To return to normal mode, press the "sound"
key repeatedly to select "SOUND MODE
OFF".
Direct selection of the source direct function
Main unit only
Main unit only
S.DIRECT
Lit
÷ To return to normal mode,
press the "sound" key re-
peatedly to select "SOUND
MODE OFF".
1
2
3
Basic use method