King Canada 9818-RJ - Manual (Page 6)

KIT CONTENTS:
1. Unpack and identify all components (Fig. 4).
Page 4
SECTION 3
INSTALLATION
TOOLS AND MATERIALS REQUIRED:
- drill and drill bit set
- tape measure
- 7/16” open end wrench (coax connections)
- 5/32” allen wrench, channel lock or pliers (to remove shipping bolt)
- 1/8” allen wrench or phillips screw driver (to remove dome cover)
- appropriate fasteners and tools to install all components and wiring
- adhesive sealant, compatible with vessel material
Fig. 4