Dismantling for servicing, Dismantling address of the service centre – Kathrein MobiSet 3 Digital CAP 700 User Manual

Page 25

Advertising
background image

25

If repairs to the system or individual components are necessary, contact your specialist dealer or our
service centre (see below for address).

Never open the turntable yourself!

• Do not cut the cables! At the cable junction provided, disconnect the cables

projecting from the turntable from the two cables laid within the interior of the
vehicle (unplug the plug).

The cables laid within the vehicle can remain there

Unscrew the six M6 screws securing the turntable to the mounting plate

Place two wooden supports on the vehicle roof, for protection

Then place the turntable on the prepared wooden supports

To ship the turntable, use the original packaging which you have saved

Seal the opening in the vehicle roof appropriately to protect against the ingress of moisture

If a HDZ 100 roof gland has been fi tted and the equipment is then removed, the cable channels
no longer used should be sealed with the integral plugs. The enclosure is then watertight once again.

Note:

Before exchanging the UFS 740sw, fi rst move the turntable to the park position.

ESC
Electronic Service Chiemgau GmbH
Bahnhofstraße 108
83224 Grassau, Germany

Phone: +49 8641 9545-0
Fax:

+49 8641 9545-35 and -36

Internet: http://www.esc-kathrein.de
e-Mail: [email protected]

DISMANTLING FOR SERVICING

DISMANTLING

ADDRESS OF THE SERVICE CENTRE

Advertising