Kathrein MobiSet 3 Digital CAP 700 - Manual (Page 43)

43
So as to avoid overheating the turntable motors, do not operate the motors
continuously for longer than 10 minutes.
None of the search procedures initiated by the CAP 700 will require as much
as 10 minutes operation. Only repeated unsuccessful search procedures or
manual overrides by the user can cause this limit to be exceeded.
All settings on the UFS 740 are made using the remote!
IMPORTANT INFORMATION FOR CAP 700 BEFORE SETUP
This section of the UFS 740 operating manual for the turntable assumes that
the UFS 740 and the turntable have been properly installed and connected, as
described in the installation and operating manuals!
If you have not yet done so, read the safety instructions at the beginning of the
UFS 740sw operating manual and follow them when handling the UFS 740sw
and the turntable!
REMOTE CONTROL
Before setting up your satellite system, make sure that the location allows a free
view to the satellite positions to the South and is not shadowed by trees or other
obstructions. This will save you time and effort!
Reception
No reception