Kenwood XD-9581MD - Manual (Page 58)

XD-9581MD (En)
58
Preparation section
Basic section
Application section
Knowledge sections
MD edit functions
Moving several tracks at a time
(QUICK MOVE)
Use the following procedure to change the current order
of tracks by selecting a desired order and moving the tracks
together.
Please execute operation in stopped condition.
Execute the track move operation.
Select Q.MOVE.
2
4
Select the range of tracks to be reordered.
÷ Use the Q.MOVE CHECK key and the Q.MOVE CLEAR key of
the remote control to confirm the selected title sequence and
to delete selected titles. For details, refer to “Confirmation or
deletion of selected titles”.
´
÷ It takes a while until the execution completes.
÷ If the ENTER key is pressed before reordering all tracks, the
tracks which have not been selected are added to the end of the
reordered range in the same order as before.
÷ You can suspend track reordering by pressing the EJECT key
( 0) or the ON/STANDBY key while “COMPLETE” is flashing.
1
1Select the first track in the reordered
range.
40 continuous tracks within the specified range can be reordered
at a time.
3
Select tracks numbers in the desired order.
Repeat steps 1 and 2 until all tracks have
been arranged in the desired order.
5
After editing, eject and remove the mini disc.
“DISC WRITING” displayed during the minidisc ejection
operation indicates that the data associated with recording
or editing is being written on the disc. Do not apply vibration
or shock to the unit while this message is displayed.
2Set the reordered range.
2Set it.
1Select a track number.
Selected track No.
To increase
track No. To decrease
track No.
To cancel, press the Q.EDIT key twice.
÷Editing is ended when no action is taken for 8 seconds.
To decrease
track No. To increase
track No.
Moving the present track No. 7 to track No. 5
Target track No. Track No. to be moved Scrolling
40 tracks
(changed range) Track No.
Select the first track in the 40-track range.
1Select Q.MOVE.
2Set it.
Switching is done each time the Q.EDIT key is pressed.
1 Q.MOVE ? (Moving several tracks at a time)
2 Q.ERASE ? (Erasing several tracks at a time)
3 Editing canceled
EN
TE
R
4
@ @ @ @
CH
AR
ACT ER/REC LE
VE
L
¢
+ −
SET
ER
PUT Q. EDIT TRAC
SET
ER
4
@ @ @ @
CH
AR ACT ER/REC LE
VE
L
¢
+ −
SET
ER
Press the key again after “Q.MOVE ok?” has
been displayed.
TOTAL
REMAIN
SINGLE
DIGITAL
1 2
1 0 4 0 ? 0 0
TOTAL
REMAIN
SINGLE
DIGITAL
1 2
M O V E ? Q .
22 23 24 25 26 27 28 1 2 3 4 5 6 7
TOTAL
REMAIN
SINGLE
DIGITAL
1 2
5 0 4 4 ? 0 0
TOTAL
REMAIN
SINGLE
DIGITAL
1 2
0 0 5 0 0 5
TOTAL
REMAIN
SINGLE
DIGITAL
1 2
M D R E C O 0 0 6 0 0 8
TOTAL
REMAIN
SINGLE
DIGITAL
1 2
K E N W O O D 0 0 5 0 0 7
TOTAL
REMAIN
TITLE SEARCH MANU. PGM REPEAT
SINGLE
DIGITAL
1 2
0 0 0 :
C O M P L E T E ! !